Description
3 Pin Press-Fit 2.54mm Male Header. Gold Plated. This connector can be pressed into a pad with a 1.00mm to 1.10mm hole (standard 1.6mm PCB width). When using a 1.00mm hole, the connector will fit very tightly, and a tool is needed for removing it. When using a 1.10mm hole, the connector is not so tight, and can easily be inserted and removed by hand.
Specifications
- Dielectric voltage: 1000V AC for one minute
- Rated current: 3A
- Insulation resistance: 1000MΩ
- Contact resistance: 4 mΩ
- Temperature range: -40℃ to +105
Material
- Insulator: Polyester UL 94V-0
- Contact Pin: Copper Alloy
- Contact Plating: Gold Flash over all
What is included
- 1 Connector
PayPal Express Checkout
To pay via PayPal Express Checkout, go to Cart! Paying via this method is very fast, no sign in or registration is required. Your address information at PayPal is used.