Important! Note "Header Type" Option above for selecting pin header connector soldered to this module! See "Pin Headers" section below for details.
The im2BL is a simple iMod module (header board) with 2 LEDs and 2 Buttons. It is part of our iMod product range, and is intended to be used with our products that have iMod ports. It can however be used for many other applications too, and can be mounted on a standard 0.1" grid prototyping board.
It has 2 red LEDs that are connected to iMod ports 2 and 4 (pins 2 and 4 of pin header). The other side of the LEDs are connect to the 0V supply via 1kOhm resistors.
The 2 buttons are connected to iMod ports 3 and 5 (pins 3 and 5 of pin header). The other side of the buttons are connect to the 0V supply via 1kOhm resistors.
Schematics (pdf format)
|Click to enlarge|
The im2BL has two rows of standard 2.54mm (0.1") pin headers. The rows are 0.7" apart, allowing this module to be mounted on a breadboard or standard 0.1" grid prototype board. The picture to the right shows some iMod modules mounted on a standard prototype board.
The pin headers can be selected to be ... See "Pin Headers" section below for details.
|im2BL Datasheet and Schematics|
To pay via PayPal Express Checkout, go to Cart! Paying via this method is very fast, no sign in or registration is required. Your address information at PayPal is used.