The Firmware for Netcruzer boards can be updated via USB, or on boards with a Web Server, via the Web Interface. For details on updating firmware, click here.
Below is a list of firmware for different Netcruzer boards contained in Vx of the Netcruzer Download. Save the required file to a location on your computer, and update the Firmware as described above. To save, right click on hex file name, and select "Save link as" (or similar).
At delivery all Netcruzer boards are programmed with a USB bootloader. This is a small program that is activated on power up if the jumper on the Netcruzer board is in the "F" position. It allows new firmware to be uploaded to the board via the "Netcruzer USB Bootloader". If for some reason this bootloader is not present on the Netcruzer board, it can be restored by downloading the appropriate hex file below for the target board, and reprogramming the board. A PIC programmer is required to program the board. After doing this, the firmware on the board can be updated via USB again.