Prototype Board, 3 LEDs, 5 pin TB


 

USD17.95

10 days
PT66EI-10P
46 item(s)
+

The PT66EI-10P is a prototype board for Netcruzer SBC66 Single Board Computers. The SBC66 board is plugged onto the PT66EI-10P board as a daughter board. All the SBC66 board's signals are made available on the PT66EI-10P, and prototyping space is provided.

It can be mounted in the ENC2015S-NZ or ENC2015S-BK-NZ enclosure. The FPAN-PT10E face plate fits onto one side of the enclosure, and a face plate for the selected SBC66 board on the other side (the FPAN-2015S-66EC for SBC66EC for example).

If the SBC66 board is required to be screwed in place, the PCBSP-143 14.3mm spacer can be placed between both boards, and boards can be screwed/bolted together. The SCREW-222SC440 self cutting screw can be used when mounting in a ENC2015S-NZ enclosure.

 

Features

  • Two 5-pin, 3.81mm terminal block connectors
  • Two red, and one green LED
  • Reset and Firmware button. If Firmware button is held in during reset (power on), board will enter bootloader mode. In this mode, firmware can be upgraded via the Netcruzer USB Bootloader. For details, click here.
  • Two iMod ports for adding iMod Modules. For example, can add RS-232, RS-485, 1-Wire or other iMod modules.
  • Can be mounted in the ENC2015S-NZ or ENC2015S-BK-NZ enclosure

Adding Processor Board

The daughter board connector has been designed for mounting a Netcruzer SBC66 Single Board Computer. The pictures below show some examples of mounting SBC66 boards onto this prototype board.

Click to enlarge

Adding iMod Modules

This board has 2 iMod port for adding an iMod module. iMod modules can be added in a variety of different ways:

  • Soldered in place
  • Pressed in with press-fit connectors
  • Plugged in for prototyping

For more information iMod modules, click here.

Adding a RS-485 iMod module to the PT66ECI (NOTE this board has 2 iMod ports, shown PT66ECI has only 1)

Soldered iMod module

Plugged in iMod module

Click to enlarge

Enclosure

It can be mounted in the ENC2015S-NZ or ENC2015S-BK-NZ enclosures. The FPAN-PT10E face plate fits onto one side of the enclosure, and a face plate for the selected SBC66 board on the other side. For example, the FPAN-2015S-66EC is used for the SBC66EC. If the SBC66 board is required to be screwed in place, the PCBSP-143 14.3mm spacer can be placed between both boards, and boards can be screwed/bolted together. The SCREW-222SC440 self cutting screw can be used when mounting in a ENC2015S-NZ enclosure.

The pictures below show some examples of this board and the PT66ECI (used in the same way) mounted in and enclosure.



Spacer and screw used to secure SBC board


Click to enlarge

Details and Documentation

For the user manual, including schematics, click here.

Eagle Schematics and PCB

The schematics and PCB file can be downloaded here.

What is included

Prototype board with connectors, as shown in main product picture at top of page.

  • 1 x Prototype board, fully assembled.
  • 2 x 5 Pin 3.81mm Female Terminal Block connectors TB05P-F381-R4
None