,

NRF24L01+PA+LNA, USB, Ceramic Antenna

Availability:

Out of stock


SKU: WRL1-002Code: WRL-NRF24L01-USB

US$ 12.42

Out of stock

This is a NRF24L01+ to USB interface.

It requires the CH340 USB driver to be installed.

All communication can be done via a virtual serial port and AT commands.

The system parameter is set to power down without loss , after power-up , keep the previous state . Built-in watchdog times to prevent lock ups. It is possible to operate in a noisy industrial control environment.  It has a RFX2401C RF front-end amplifier chip to maximize the wireless signal. Large 22dBm, effectively increasing the communication distance.

NOTE that many of the command replies are in Chinese!

Data

A maximum of 32 bytes can be sent and received. The first byte indicates the number of data bytes to follow, meaning 1-31 data bytes can be sent in a single message.

For example, we we sent "ABC" (3 bytes), then the actual transmission will be 4 bytes long, with the first by being the number 3 = "3ABC".

Buff[0]Buff[1]Buff[2]Buff[3]Buff[..]Buff[..]Buff[31]
LengthByte 1Byte 2Byte 3Byte ..Byte ..Byte 31

Commands

CommandFormatDescription
Set the serial baud rateAT+BAUD=nn=1,2,3,4,5,6,7, corresponds to 4800,9600,14400,19200,38400,57600,115200
Wireless communication transmission rateAT+RATE=nn=1,2,3 corresponds to 250Kbps,1Mbps, 2Mbps
Wireless receiving local addressAT+RXA=0x??,0x??,0x??,0x??, 0x??0x?? For the address to be set, the comma must be a comma in English.
Wireless destination addressAT+TXA=0x??,0x??,0x??,0x??,0x??Ox?? Gives the destination address or addresses
Wireless communication channel settingAT+FREQ=2.xxxGThe channel 2.xxx is set to a frequency range of 2.400 GHz to 2.525 GHz, and the over range is invalid.
Wireless CRC checksum settingAT+CRC=nn is equal to 8 or 16, and the AT+CRC-8 setting check mode is an 8-bit CRC check.
Parameter information queryAT?The system replies to the current system parameters.
Initialization commandAT+initSystem parameter reset to factory settings
Query firmware versionAT+VERIt is convenient to determine the software version and solve system bugs.

Special Note: The parameters set above will be effective immediately after setting; the system will be powered on again, the parameters will not be lost. After the system parameters are set, they will be automatically stored in the communication module, avoiding the customer's next use after each setting. The trouble of setting parameters again.

Package Includes

1 x NRF24L01+ USB Module

[mx_insert-post-ebay slug="ebay-t-default"]
SKU: WRL1-002 Categories: , Tags: ,
Weight10 g
Voltage

Wired Technology

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “NRF24L01+PA+LNA, USB, Ceramic Antenna”

There are no reviews yet.