Contains hardware specific defines for the im2BL Button/LED iMod module. More...
Go to the source code of this file.
Functions | |
void | im2bl_Init (BYTE imodPort) |
Contains hardware specific defines for the im2BL Button/LED iMod module.
This module includes hardware specific defines for the im2BL Button/LED iMod module. This file is normally not used by itself, but is included by other files that implement iMod ports. For example, the nz_pt66din6.h and nz_pt66eci.h. For details on using this module, see the documentation of these file.
The following defines are used to configure this module, and should be placed in projdefs.h. Note that all items marked [-DEFAULT-] are defaults, and do not have to be placed in projdefs.h if they contain desired configuration! For details, see Project Configuration.
The software supplied herewith is owned by Modtronix Engineering, and is protected under applicable copyright laws. The software supplied herewith is intended and supplied to you, the Company customer, for use solely and exclusively on products manufactured by Modtronix Engineering. The code may be modified and can be used free of charge for commercial and non commercial applications. All rights are reserved. Any use in violation of the foregoing restrictions may subject the user to criminal sanctions under applicable laws, as well as to civil liability for the breach of the terms and conditions of this license.
THIS SOFTWARE IS PROVIDED IN AN 'AS IS' CONDITION. NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
File History
2012-08-06, David H. (DH):
void im2bl_Init | ( | BYTE | imodPort) |
im2BL Initialization